Range of application

Command devices are mounted in switchboards, control panels, two-hand control panels and in the lift industry. On manual actuation, the devices start or terminate operating sequences and functional processes.

There are versions as push buttons, semi-rotary, key-operated and emergency stop switches. The emergency stop devices are wired in the safety circuit of machinery or plants. They fulfil the requirements of EN 60204-1.

Design and operating principle

The command devices are fit for ∅ 22.5 mm mounting holes and suitable for spacings of 30 mm between centres. All command devices provide protection class IP 65/67 and are double insulated for class II.

The actuator is connected to the ES14 switch by a bayonet fastener. Available switching elements with slow action are: emergency-stop push-buttons, push-buttons with and without diaphragm, selectors, control switches and key-operated switches.

All command devices shown in this chapter bear the CE mark according to the Low Voltage Directive 06/95/EC and the emergency-stop push-buttons according to the Machinery Directive 2006/42/EC.

Products »