専門記事

One fits all

A new series of emergency pull wire switches demonstrates the benefits of modular construction in electromechanical switchgear. This switchgear series can withstand extreme ambient conditions, can be used universally and is highly versatile with regard to installation, mounting and integration in existing equipment.

Source: Der Konstrukteur (7-8/2019)

Download Technical article (474 K)

Position monitoring on loading systems - Switchgear for extreme applications

Petrol, natural gas and liquid gas are typical products handled using loading systems manufactured by Emco Wheaton. These loading systems are frequently to be found at the end of a process chain, at production sites or logistics stations like fuel depots or, in "ship to shore" applications, at ports.

Source: Chemietechnik (6/2019)

Download Technical article (473 K)

Emergency pull-wire switches - Machine safety in extreme environments

At its Neuhof-Ellers site near Fulda, the company K+S Kali mines raw potash and magnesium salts at depths of down to 800 metres. The atmosphere in the flotation plants which separate the potassium chloride from the rock salt and other mineral salt constituent parts is extremely corrosive. Trust is therefore placed in "Extreme" emergency pull-wire switches which have been thoroughly tested and which allow the plants to be switched off very fast should a dangerous situation occur.

Source: Schüttgut (4/2019)

Download Technical article (311 K)

When material flow management goes mobile

Automated guided vehicles (AGV) which are resting can be woken up by remote control and then sent back to sleep when they are no longer needed. This is made possible by a low-energy wireless system including a "deep sleep" mode which is already used by several renowned AGV manufacturers and which is also responsible for communication between the vehicles and their control centre.

Source: materialfluss (06/2019)

Download Technical article (382 K)

Managed by wireless network. Efficient provision of replenishments – with eKanban

Providing e.g. assembly workstations with replenishments using an eKanban system requires sensor technology in the Kanban racks and communication with superordinate IT/OT systems. For this an "out of the box" solution is now available with simple-to-configure applications.

Source: Der Betriebsleiter (03/2019)

Download Technical article (372 K)